0.环境

1.软件版本

系统	版本
centos	7.9(内核采用4.19)
docker	20.10.15
kubeadm	1.22.17

2.ip划分

主机名	ip地址	系统配置
slb	10.103.236.236	1core_2g
kubeadm-master	10.103.236.201	2core_2g
kubeadm-node01	10.103.236.202	1core_2g
kubeadm-node02	10.103.236.203	1core_2g
kubeadm-node03	10.103.236.204	1core_2g
pod网段	172.16.0.0/12
service网段	192.168.0.0/16
host网段	10.103.236.0/12

3.图

1.配置kubeadm源

1.1安装依赖

shell

yum install -y yum-utils device-mapper-persistent-data lvm2 wget jq psmisc vim net-tools telnet

yum install -y yum-utils device-mapper-persistent-data lvm2 wget jq psmisc vim net-tools telnet

1.2配置aliyun源

shell

curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo

#修改地址
sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo

curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo

#修改地址
sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo

1.3配置docker源

shell

yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

1.4配置kubernetes源

shell

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

2.基本环境配置

文档，https://kubernetes.io/docs/setup/production-environment/tools/kubeadm/install-kubeadm/

2.1 关闭selinux等

所有节点关闭防火墙、selinux、dnsmasq、swap

shell

systemctl disable --now firewalld 
systemctl disable --now dnsmasq
systemctl disable --now NetworkManager

setenforce 0
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config

systemctl disable --now firewalld 
systemctl disable --now dnsmasq
systemctl disable --now NetworkManager

setenforce 0
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config

2.2 关闭swap

shell

swapoff -a && sysctl -w vm.swappiness=0

sed -ri '/^[^#]*swap/s@^@#@' /etc/fstab

swapoff -a && sysctl -w vm.swappiness=0

sed -ri '/^[^#]*swap/s@^@#@' /etc/fstab

2.3 时间同步

shell

#安装服务
yum install chrony -y

#启动服务
systemctl enable chronyd --now

#同步时间
[root@kube-master yum.repos.d]# chronyc sources
210 Number of sources = 4
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^- tock.ntp.infomaniak.ch        1  10   377   283    -10ms[  -10ms] +/-   87ms
^- ntp8.flashdance.cx            2  10   377   192    -18ms[  -18ms] +/-  154ms
^* 139.199.215.251               2  10   377   859   -902us[ -511us] +/-   59ms
^- tick.ntp.infomaniak.ch        1  10   377   27m    +26ms[  +26ms] +/-  133ms

#安装服务
yum install chrony -y

#启动服务
systemctl enable chronyd --now

#同步时间
[root@kube-master yum.repos.d]# chronyc sources
210 Number of sources = 4
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^- tock.ntp.infomaniak.ch        1  10   377   283    -10ms[  -10ms] +/-   87ms
^- ntp8.flashdance.cx            2  10   377   192    -18ms[  -18ms] +/-  154ms
^* 139.199.215.251               2  10   377   859   -902us[ -511us] +/-   59ms
^- tick.ntp.infomaniak.ch        1  10   377   27m    +26ms[  +26ms] +/-  133ms

或者

安装ntpdate

shell

rpm -ivh http://mirrors.wlnmp.com/centos/wlnmp-release-centos.noarch.rpm
yum install ntpdate -y

#操作如下
ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
echo 'Asia/Shanghai' >/etc/timezone
ntpdate time2.aliyun.com
# 加入到crontab
*/5 * * * * /usr/sbin/ntpdate time2.aliyun.com

rpm -ivh http://mirrors.wlnmp.com/centos/wlnmp-release-centos.noarch.rpm
yum install ntpdate -y

#操作如下
ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
echo 'Asia/Shanghai' >/etc/timezone
ntpdate time2.aliyun.com
# 加入到crontab
*/5 * * * * /usr/sbin/ntpdate time2.aliyun.com

2.4 limit配置

shell

ulimit -SHn 65535

#添加配置文件
vim /etc/security/limits.conf
# 末尾添加如下内容
* soft nofile 65536
* hard nofile 131072
* soft nproc 65535
* hard nproc 655350
* soft memlock unlimited
* hard memlock unlimited

ulimit -SHn 65535

#添加配置文件
vim /etc/security/limits.conf
# 末尾添加如下内容
* soft nofile 65536
* hard nofile 131072
* soft nproc 65535
* hard nproc 655350
* soft memlock unlimited
* hard memlock unlimited

2.5 内核配置

1.升级内核

CentOS7 需要升级内核至4.18+，本地升级的版本为4.19，所有节点升级

shell

#下载
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-devel-4.19.12-1.el7.elrepo.x86_64.rpm
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-4.19.12-1.el7.elrepo.x86_64.rpm

#安装
yum localinstall -y kernel-ml*

#更改内核启动顺序
grub2-set-default  0 && grub2-mkconfig -o /etc/grub2.cfg
grubby --args="user_namespace.enable=1" --update-kernel="$(grubby --default-kernel)"

#查看内核启动版本
[root@kube-master yum.repos.d]# grubby --default-kernel
/boot/vmlinuz-4.19.12-1.el7.elrepo.x86_64

#启动所有节点
reboot

#查看版本
uname -a

#下载
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-devel-4.19.12-1.el7.elrepo.x86_64.rpm
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-4.19.12-1.el7.elrepo.x86_64.rpm

#安装
yum localinstall -y kernel-ml*

#更改内核启动顺序
grub2-set-default  0 && grub2-mkconfig -o /etc/grub2.cfg
grubby --args="user_namespace.enable=1" --update-kernel="$(grubby --default-kernel)"

#查看内核启动版本
[root@kube-master yum.repos.d]# grubby --default-kernel
/boot/vmlinuz-4.19.12-1.el7.elrepo.x86_64

#启动所有节点
reboot

#查看版本
uname -a

2.安装ipvsadm

shell

yum install ipvsadm ipset sysstat conntrack libseccomp -y

yum install ipvsadm ipset sysstat conntrack libseccomp -y

配置ipvs模块

在内核4.19+版本nf_conntrack_ipv4已经改为nf_conntrack

在内核4.18以下使用nf_conntrack_ipv4

shell

vim /etc/modules-load.d/ipvs.conf 
# 加入以下内容
ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
ip_vs_sh
nf_conntrack
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip

#启动
systemctl enable --now systemd-modules-load.service

vim /etc/modules-load.d/ipvs.conf 
# 加入以下内容
ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
ip_vs_sh
nf_conntrack
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip

#启动
systemctl enable --now systemd-modules-load.service

或者其他方式

shell

#启动时能自动加载模块
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack
EOF

#授权
chmod 755 /etc/sysconfig/modules/ipvs.modules

#执行
sh /etc/sysconfig/modules/ipvs.modules

#查看
[root@kube-master yum.repos.d]# lsmod |grep -e ip_vs -e nf_conntrack
nf_conntrack_netlink    40960  0
nfnetlink              16384  3 nf_conntrack_netlink,ip_set
ip_vs_ftp              16384  0
nf_nat                 32768  2 nf_nat_ipv4,ip_vs_ftp
ip_vs_sed              16384  0
ip_vs_nq               16384  0
ip_vs_fo               16384  0
ip_vs_sh               16384  0
ip_vs_dh               16384  0
ip_vs_lblcr            16384  0
ip_vs_lblc             16384  0
ip_vs_wrr              16384  0
ip_vs_rr               16384  0
ip_vs_wlc              16384  0
ip_vs_lc               16384  0
ip_vs                 151552  24 ip_vs_wlc,ip_vs_rr,ip_vs_dh,ip_vs_lblcr,ip_vs_sh,ip_vs_fo,ip_vs_nq,ip_vs_lblc,ip_vs_wrr,ip_vs_lc,ip_vs_sed,ip_vs_ftp
nf_conntrack          143360  6 xt_conntrack,nf_nat,ipt_MASQUERADE,nf_nat_ipv4,nf_conntrack_netlink,ip_vs
nf_defrag_ipv6         20480  1 nf_conntrack
nf_defrag_ipv4         16384  1 nf_conntrack
libcrc32c              16384  4 nf_conntrack,nf_nat,xfs,ip_vs

#启动时能自动加载模块
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack
EOF

#授权
chmod 755 /etc/sysconfig/modules/ipvs.modules

#执行
sh /etc/sysconfig/modules/ipvs.modules

#查看
[root@kube-master yum.repos.d]# lsmod |grep -e ip_vs -e nf_conntrack
nf_conntrack_netlink    40960  0
nfnetlink              16384  3 nf_conntrack_netlink,ip_set
ip_vs_ftp              16384  0
nf_nat                 32768  2 nf_nat_ipv4,ip_vs_ftp
ip_vs_sed              16384  0
ip_vs_nq               16384  0
ip_vs_fo               16384  0
ip_vs_sh               16384  0
ip_vs_dh               16384  0
ip_vs_lblcr            16384  0
ip_vs_lblc             16384  0
ip_vs_wrr              16384  0
ip_vs_rr               16384  0
ip_vs_wlc              16384  0
ip_vs_lc               16384  0
ip_vs                 151552  24 ip_vs_wlc,ip_vs_rr,ip_vs_dh,ip_vs_lblcr,ip_vs_sh,ip_vs_fo,ip_vs_nq,ip_vs_lblc,ip_vs_wrr,ip_vs_lc,ip_vs_sed,ip_vs_ftp
nf_conntrack          143360  6 xt_conntrack,nf_nat,ipt_MASQUERADE,nf_nat_ipv4,nf_conntrack_netlink,ip_vs
nf_defrag_ipv6         20480  1 nf_conntrack
nf_defrag_ipv4         16384  1 nf_conntrack
libcrc32c              16384  4 nf_conntrack,nf_nat,xfs,ip_vs

3.配置必要参数

shell

cat <<EOF > /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
fs.may_detach_mounts = 1
net.ipv4.conf.all.route_localnet = 1
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.netfilter.nf_conntrack_max=2310720
net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_intvl =15
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_max_orphans = 327680
net.ipv4.tcp_orphan_retries = 3
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.ip_conntrack_max = 65536
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_timestamps = 0
net.core.somaxconn = 16384
EOF

cat <<EOF > /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
fs.may_detach_mounts = 1
net.ipv4.conf.all.route_localnet = 1
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.netfilter.nf_conntrack_max=2310720
net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_intvl =15
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_max_orphans = 327680
net.ipv4.tcp_orphan_retries = 3
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.ip_conntrack_max = 65536
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_timestamps = 0
net.core.somaxconn = 16384
EOF

重新加载

shell

sysctl --system

sysctl --system

重启所有系统，查看模块是否加载好

shell

reboot
lsmod | grep --color=auto -e ip_vs -e nf_conntrack

reboot
lsmod | grep --color=auto -e ip_vs -e nf_conntrack

2.6配置hosts

shell

#新添加如下，对应关系错误，否则会出现calico启动错误
vim  /etc/hosts
10.103.236.201 kube-master
10.103.236.202 kube-node01
10.103.236.203 kube-node02
10.103.236.204 kube-node03

#新添加如下，对应关系错误，否则会出现calico启动错误
vim  /etc/hosts
10.103.236.201 kube-master
10.103.236.202 kube-node01
10.103.236.203 kube-node02
10.103.236.204 kube-node03

2.7配置集群命令自动补全

https://kubernetes.io/zh/docs/tasks/tools/included/optional-kubectl-configs-bash-linux/

shell

yum install bash-completion -y

echo 'source <(kubectl completion bash)' >>~/.bashrc

yum install bash-completion -y

echo 'source <(kubectl completion bash)' >>~/.bashrc

3.Runtime安装

❌ 注意

如果安装的版本低于1.24，选择Docker和Containerd均可，高于1.24选择Containerd作为Runtime

3.1 Containerd作为Runtime

所有节点

1.安装docker-ce-20.10

shell

yum install docker-ce-20.10.* docker-ce-cli-20.10.* -y

#可以无需启动Docker，只需要配置和启动Containerd即可

yum install docker-ce-20.10.* docker-ce-cli-20.10.* -y

#可以无需启动Docker，只需要配置和启动Containerd即可

2.配置Containerd所需模块

shell

cat <<EOF | sudo tee /etc/modules-load.d/containerd.conf
overlay
br_netfilter
EOF

#加载模块
modprobe -- overlay
modprobe -- br_netfilter

cat <<EOF | sudo tee /etc/modules-load.d/containerd.conf
overlay
br_netfilter
EOF

#加载模块
modprobe -- overlay
modprobe -- br_netfilter

3.配置Containerd所需的内核

shell

cat <<EOF | sudo tee /etc/sysctl.d/99-kubernetes-cri.conf
net.bridge.bridge-nf-call-iptables  = 1
net.ipv4.ip_forward                 = 1
net.bridge.bridge-nf-call-ip6tables = 1
EOF

#重新加载内核
sysctl --system

cat <<EOF | sudo tee /etc/sysctl.d/99-kubernetes-cri.conf
net.bridge.bridge-nf-call-iptables  = 1
net.ipv4.ip_forward                 = 1
net.bridge.bridge-nf-call-ip6tables = 1
EOF

#重新加载内核
sysctl --system

4.配置Containerd文件

mkdir -p /etc/containerd
containerd config default | tee /etc/containerd/config.toml

mkdir -p /etc/containerd
containerd config default | tee /etc/containerd/config.toml

找到containerd.runtimes.runc.options，添加SystemdCgroup = true（如果已存在直接修改，否则会报错）

修改镜像，否则你懂的

默认是， sandbox_image = "registry.k8s.io/pause:3.6",根据版本进行修改

shell

vim /etc/containerd/config.toml
#修改成
sandbox_image = "registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.6"

vim /etc/containerd/config.toml
#修改成
sandbox_image = "registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.6"

5.启动

shell

systemctl daemon-reload
systemctl enable --now containerd

#配置crictl客户端连接的运行时位置
cat > /etc/crictl.yaml <<EOF
runtime-endpoint: unix:///run/containerd/containerd.sock
image-endpoint: unix:///run/containerd/containerd.sock
timeout: 10
debug: false
EOF

systemctl daemon-reload
systemctl enable --now containerd

#配置crictl客户端连接的运行时位置
cat > /etc/crictl.yaml <<EOF
runtime-endpoint: unix:///run/containerd/containerd.sock
image-endpoint: unix:///run/containerd/containerd.sock
timeout: 10
debug: false
EOF

3.2 Docker作为Runtime

❌ 注意

如果选择Docker作为Runtime，安装步骤较Containerd较为简单，只需要安装并启动即可（版本小于1.24）

1.安装

shell

yum install docker-ce-20.10.* docker-ce-cli-20.10.* -y

yum install docker-ce-20.10.* docker-ce-cli-20.10.* -y

新版官方建议，新版Kubelet建议使用systemd，所以把Docker的CgroupDriver也改成systemd

shell

mkdir /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": [
  	"native.cgroupdriver=systemd"
  ],
  "max-concurrent-downloads": 10,
  "max-concurrent-uploads": 5,
  "live-restore":true,
  "log-driver": "json-file",
  "log-opts": {
  	"max-size": "100m",
	"max-file":"5"
  },
  "storage-driver": "overlay2",
  "storage-opts": [
  	"overlay2.override_kernel_check=true"
  ],
  "registry-mirrors" : [
  ],
  "data-root": "/data/docker"
}
EOF

mkdir /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": [
  	"native.cgroupdriver=systemd"
  ],
  "max-concurrent-downloads": 10,
  "max-concurrent-uploads": 5,
  "live-restore":true,
  "log-driver": "json-file",
  "log-opts": {
  	"max-size": "100m",
	"max-file":"5"
  },
  "storage-driver": "overlay2",
  "storage-opts": [
  	"overlay2.override_kernel_check=true"
  ],
  "registry-mirrors" : [
  ],
  "data-root": "/data/docker"
}
EOF

2.启动

shell

systemctl daemon-reload && systemctl enable --now docker

systemctl daemon-reload && systemctl enable --now docker

4.安装Kubernetes组件

1.查看版本

在master上面查看最新版本

shell

yum list kubeadm.x86_64 --showduplicates | sort -r

yum list kubeadm.x86_64 --showduplicates | sort -r

2.安装

所有节点安装，kubeadm、kubelet和kubectl

指定版本安装

shell

yum install -y kubelet-1.22.17 kubeadm-1.22.* kubectl-1.22.17

yum install -y kubelet-1.22.17 kubeadm-1.22.* kubectl-1.22.17

安装最新

shell

yum install kubeadm-1.22* kubelet-1.22* kubectl-1.22* -y

yum install kubeadm-1.22* kubelet-1.22* kubectl-1.22* -y

❌ 注意

如果选择的是Containerd作为的Runtime，需要更改Kubelet的配置使用Containerd作为Runtime：

cgroup驱动

shell

cat >/etc/sysconfig/kubelet<<EOF
KUBELET_KUBEADM_ARGS="--cgroup-driver=systemd --container-runtime=remote --runtime-request-timeout=15m --container-runtime-endpoint=unix:///run/containerd/containerd.sock"
EOF

cat >/etc/sysconfig/kubelet<<EOF
KUBELET_KUBEADM_ARGS="--cgroup-driver=systemd --container-runtime=remote --runtime-request-timeout=15m --container-runtime-endpoint=unix:///run/containerd/containerd.sock"
EOF

💡 说明

如果不是采用Containerd作为的Runtime，请不要执行上述命令

3.启动

由于还未初始化，没有kubelet的配置文件，此时kubelet无法启动，无需担心

shell

systemctl daemon-reload
systemctl enable --now kubelet

#查看kubelet 是否以systemd启动
vim /var/lib/kubelet/config.yaml

systemctl daemon-reload
systemctl enable --now kubelet

#查看kubelet 是否以systemd启动
vim /var/lib/kubelet/config.yaml

5.Kubernetes高可用

6.Kubernetes初始化

官当

https://kubernetes.io/docs/setup/production-environment/tools/kubeadm/high-availability/

❌ 注意

创建kubeadm-config.yaml配置文件，只在Master01节点执行！！！

Master01：（# 注意，如果不是高可用集群，10.103.236.236:16443改为master01的地址，16443改为apiserver的端口，默认是6443，注意更改kubernetesVersion的值和自己服务器kubeadm的版本一致：kubeadm version）

6.1创建配置文件

yaml

vim kubeadm-config.yaml

apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: 7t2weq.bjbawausm0jaxury
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 10.103.236.201
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock  # 如果是Docker
  #criSocket: /run/containerd/containerd.sock # 如果是Containerd
  name: k8s-master01
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  certSANs:
  - 10.103.236.201
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controlPlaneEndpoint: 10.103.236.201:6443
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.22.17 # 更改此处的版本号和kubeadm version一致
networking:
  dnsDomain: cluster.local
  podSubnet: 172.16.0.0/12
  serviceSubnet: 192.168.0.0/16
scheduler: {}

vim kubeadm-config.yaml

apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: 7t2weq.bjbawausm0jaxury
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 10.103.236.201
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock  # 如果是Docker
  #criSocket: /run/containerd/containerd.sock # 如果是Containerd
  name: k8s-master01
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  certSANs:
  - 10.103.236.201
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controlPlaneEndpoint: 10.103.236.201:6443
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.22.17 # 更改此处的版本号和kubeadm version一致
networking:
  dnsDomain: cluster.local
  podSubnet: 172.16.0.0/12
  serviceSubnet: 192.168.0.0/16
scheduler: {}

更新配置文件

shell

kubeadm config migrate --old-config kubeadm-config.yaml --new-config new.yaml

kubeadm config migrate --old-config kubeadm-config.yaml --new-config new.yaml

6.2拉取镜像

查看所需镜像

shell

[root@kube-master kubeadm]# kubeadm config images list --kubernetes-version=v1.22.17
registry.k8s.io/kube-apiserver:v1.22.17
registry.k8s.io/kube-controller-manager:v1.22.17
registry.k8s.io/kube-scheduler:v1.22.17
registry.k8s.io/kube-proxy:v1.22.17
registry.k8s.io/pause:3.5
registry.k8s.io/etcd:3.5.6-0
registry.k8s.io/coredns/coredns:v1.8.4

[root@kube-master kubeadm]# kubeadm config images list --kubernetes-version=v1.22.17
registry.k8s.io/kube-apiserver:v1.22.17
registry.k8s.io/kube-controller-manager:v1.22.17
registry.k8s.io/kube-scheduler:v1.22.17
registry.k8s.io/kube-proxy:v1.22.17
registry.k8s.io/pause:3.5
registry.k8s.io/etcd:3.5.6-0
registry.k8s.io/coredns/coredns:v1.8.4

手动拉取阿里云

shell

kubeadm config images pull --image-repository registry.aliyuncs.com/google_containers

kubeadm config images pull --image-repository registry.aliyuncs.com/google_containers

根据配置文件进行拉取

shell

[root@kube-master kubeadm]# kubeadm config images pull --config /root/kubeadm/new.yaml
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.22.17
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.22.17
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.22.17
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.22.17
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.5
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.5.6-0
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.8.4

[root@kube-master kubeadm]# kubeadm config images pull --config /root/kubeadm/new.yaml
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.22.17
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.22.17
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.22.17
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.22.17
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.5
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.5.6-0
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.8.4

所有节点设置开机自启动kubelet

shell

systemctl enable --now kubelet

systemctl enable --now kubelet

6.3master节点初始化

初始化以后会在/etc/kubernetes目录下生成对应的证书和配置文件，之后其他Master节点加入Master01即可

shell

[root@kube-master kubeadm]# kubeadm init --config /root/kubeadm/new.yaml  --upload-certs


[init] Using Kubernetes version: v1.22.17
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [192.168.0.1 10.103.236.201]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master01 localhost] and IPs [10.103.236.201 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master01 localhost] and IPs [10.103.236.201 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 9.504786 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.22" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Storing the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
[upload-certs] Using certificate key:
1980f439d979e2f4f73105f2230d6c962b811edde47ea7e18bead49e8d284132
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the labels: [node-role.kubernetes.io/master(deprecated)node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: 7t2weq.bjbawausm0jaxury
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of the control-plane node running the following command on each as root:

  kubeadm join 10.103.236.201:6443 --token 7t2weq.bjbawausm0jaxury \
	--discovery-token-ca-cert-hash sha256:89ad2d95b4ffcdbf9370ccc4925f0195a80e98e5436404ecef548091db31b234 \
	--control-plane --certificate-key 1980f439d979e2f4f73105f2230d6c962b811edde47ea7e18bead49e8d284132

Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.103.236.201:6443 --token 7t2weq.bjbawausm0jaxury \
	--discovery-token-ca-cert-hash sha256:89ad2d95b4ffcdbf9370ccc4925f0195a80e98e5436404ecef548091db31b234

[root@kube-master kubeadm]# kubeadm init --config /root/kubeadm/new.yaml  --upload-certs


[init] Using Kubernetes version: v1.22.17
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [192.168.0.1 10.103.236.201]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master01 localhost] and IPs [10.103.236.201 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master01 localhost] and IPs [10.103.236.201 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 9.504786 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.22" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Storing the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
[upload-certs] Using certificate key:
1980f439d979e2f4f73105f2230d6c962b811edde47ea7e18bead49e8d284132
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the labels: [node-role.kubernetes.io/master(deprecated)node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: 7t2weq.bjbawausm0jaxury
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of the control-plane node running the following command on each as root:

  kubeadm join 10.103.236.201:6443 --token 7t2weq.bjbawausm0jaxury \
	--discovery-token-ca-cert-hash sha256:89ad2d95b4ffcdbf9370ccc4925f0195a80e98e5436404ecef548091db31b234 \
	--control-plane --certificate-key 1980f439d979e2f4f73105f2230d6c962b811edde47ea7e18bead49e8d284132

Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.103.236.201:6443 --token 7t2weq.bjbawausm0jaxury \
	--discovery-token-ca-cert-hash sha256:89ad2d95b4ffcdbf9370ccc4925f0195a80e98e5436404ecef548091db31b234

如果初始化失败，重置后再次初始化，命令如下（没有失败不要执行）
kubeadm reset -f ; ipvsadm --clear ; rm -rf ~/.kube

配置访问k8s集群配置文件

Master01节点配置环境变量，用于访问Kubernetes集群，如果不配置则提示如下信息：

shell

[root@kube-master kubeadm]# kubectl get node
The connection to the server localhost:8080 was refused - did you specify the right host or port?

[root@kube-master kubeadm]# kubectl get node
The connection to the server localhost:8080 was refused - did you specify the right host or port?

添加可以访问集群的配置

shell

mkdir -p $HOME/.kube
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

mkdir -p $HOME/.kube
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

或者

shell

cat <<EOF >> /root/.bashrc
export KUBECONFIG=/etc/kubernetes/admin.conf
EOF
source /root/.bashrc

cat <<EOF >> /root/.bashrc
export KUBECONFIG=/etc/kubernetes/admin.conf
EOF
source /root/.bashrc

查看状态

shell

[root@kube-master kubernetes]# kubectl get node
NAME           STATUS     ROLES                  AGE     VERSION
k8s-master01   NotReady   control-plane,master   6m19s   v1.22.17

[root@kube-master kubernetes]# kubectl get node
NAME           STATUS     ROLES                  AGE     VERSION
k8s-master01   NotReady   control-plane,master   6m19s   v1.22.17

采用初始化安装方式，所有的系统组件均以容器的方式运行并且在kube-system命名空间内，此时可以查看Pod状态：

shell

[root@kube-master kubernetes]# kubectl get pod -n kube-system
NAME                                   READY   STATUS    RESTARTS   AGE
coredns-7d89d9b6b8-72nw2               0/1     Pending   0          8m
coredns-7d89d9b6b8-fwkbz               0/1     Pending   0          8m
etcd-k8s-master01                      1/1     Running   0          8m14s
kube-apiserver-k8s-master01            1/1     Running   0          8m14s
kube-controller-manager-k8s-master01   1/1     Running   0          8m14s
kube-proxy-8z6lf                       1/1     Running   0          8m
kube-scheduler-k8s-master01            1/1     Running   0          8m14s

[root@kube-master kubernetes]# kubectl get pod -n kube-system
NAME                                   READY   STATUS    RESTARTS   AGE
coredns-7d89d9b6b8-72nw2               0/1     Pending   0          8m
coredns-7d89d9b6b8-fwkbz               0/1     Pending   0          8m
etcd-k8s-master01                      1/1     Running   0          8m14s
kube-apiserver-k8s-master01            1/1     Running   0          8m14s
kube-controller-manager-k8s-master01   1/1     Running   0          8m14s
kube-proxy-8z6lf                       1/1     Running   0          8m
kube-scheduler-k8s-master01            1/1     Running   0          8m14s

6.4node节点加入

到node节点下执行如下命令

shell

kubeadm join 10.103.236.201:6443 --token 7t2weq.bjbawausm0jaxury \
--discovery-token-ca-cert-hash sha256:89ad2d95b4ffcdbf9370ccc4925f0195a80e98e5436404ecef548091db31b234

kubeadm join 10.103.236.201:6443 --token 7t2weq.bjbawausm0jaxury \
--discovery-token-ca-cert-hash sha256:89ad2d95b4ffcdbf9370ccc4925f0195a80e98e5436404ecef548091db31b234

如果node节点加入失败，删除如下文件，重新加入

shell

rm /etc/kubernetes /var/lib/kubelet -rf

rm /etc/kubernetes /var/lib/kubelet -rf

6.5master节点加入

到master节点下执行如下命令

shell

kubeadm join 10.103.236.201:6443 --token 7t2weq.bjbawausm0jaxury \
	--discovery-token-ca-cert-hash sha256:89ad2d95b4ffcdbf9370ccc4925f0195a80e98e5436404ecef548091db31b234 \
	--control-plane --certificate-key 1980f439d979e2f4f73105f2230d6c962b811edde47ea7e18bead49e8d284132

kubeadm join 10.103.236.201:6443 --token 7t2weq.bjbawausm0jaxury \
	--discovery-token-ca-cert-hash sha256:89ad2d95b4ffcdbf9370ccc4925f0195a80e98e5436404ecef548091db31b234 \
	--control-plane --certificate-key 1980f439d979e2f4f73105f2230d6c962b811edde47ea7e18bead49e8d284132

key过期

shell

#查看token过期时间，同new.yaml查看用的是那个key
[root@kube-master ~]# kubectl get secret -n kube-system |grep 7t2weq
bootstrap-token-7t2weq                           bootstrap.kubernetes.io/token         6      68m

#查看token详情
[root@kube-master ~]# kubectl get secret -n kube-system bootstrap-token-7t2weq  -oyaml
apiVersion: v1
data:
  auth-extra-groups: c3lzdGVtOmJvb3RzdHJhcHBlcnM6a3ViZWFkbTpkZWZhdWx0LW5vZGUtdG9rZW4=
  expiration: MjAyNC0wNC0xMVQwODozMjowNFo=
  token-id: N3Qyd2Vx
  token-secret: YmpiYXdhdXNtMGpheHVyeQ==
  usage-bootstrap-authentication: dHJ1ZQ==
  usage-bootstrap-signing: dHJ1ZQ==
kind: Secret
metadata:
  creationTimestamp: "2024-04-10T08:32:04Z"
  name: bootstrap-token-7t2weq
  namespace: kube-system
  resourceVersion: "225"
  uid: da1a3e6f-1738-4fc6-a8ef-487a7bb70ec5
type: bootstrap.kubernetes.io/token

#解密，查看时间
[root@kube-master ~]# echo "MjAyNC0wNC0xMVQwODozMjowNFo=" |base64 -d
2024-04-11T08:32:04Z

Token过期后生成新的token：
kubeadm token create --print-join-command

Master需要生成--certificate-key
kubeadm init phase upload-certs  --upload-certs

#查看token过期时间，同new.yaml查看用的是那个key
[root@kube-master ~]# kubectl get secret -n kube-system |grep 7t2weq
bootstrap-token-7t2weq                           bootstrap.kubernetes.io/token         6      68m

#查看token详情
[root@kube-master ~]# kubectl get secret -n kube-system bootstrap-token-7t2weq  -oyaml
apiVersion: v1
data:
  auth-extra-groups: c3lzdGVtOmJvb3RzdHJhcHBlcnM6a3ViZWFkbTpkZWZhdWx0LW5vZGUtdG9rZW4=
  expiration: MjAyNC0wNC0xMVQwODozMjowNFo=
  token-id: N3Qyd2Vx
  token-secret: YmpiYXdhdXNtMGpheHVyeQ==
  usage-bootstrap-authentication: dHJ1ZQ==
  usage-bootstrap-signing: dHJ1ZQ==
kind: Secret
metadata:
  creationTimestamp: "2024-04-10T08:32:04Z"
  name: bootstrap-token-7t2weq
  namespace: kube-system
  resourceVersion: "225"
  uid: da1a3e6f-1738-4fc6-a8ef-487a7bb70ec5
type: bootstrap.kubernetes.io/token

#解密，查看时间
[root@kube-master ~]# echo "MjAyNC0wNC0xMVQwODozMjowNFo=" |base64 -d
2024-04-11T08:32:04Z

Token过期后生成新的token：
kubeadm token create --print-join-command

Master需要生成--certificate-key
kubeadm init phase upload-certs  --upload-certs

7.Kubernetes组件安装

7.1 Calico

Calico可以控制策略，而flannel 不能

以下步骤只在master01执行

只修改pod网段

shell

POD_SUBNET=`cat /etc/kubernetes/manifests/kube-controller-manager.yaml | grep cluster-cidr= | awk -F= '{print $NF}'

sed -i "s#POD_CIDR#${POD_SUBNET}#g" calico.yaml

#安装
kubectl apply -f calico.yaml

POD_SUBNET=`cat /etc/kubernetes/manifests/kube-controller-manager.yaml | grep cluster-cidr= | awk -F= '{print $NF}'

sed -i "s#POD_CIDR#${POD_SUBNET}#g" calico.yaml

#安装
kubectl apply -f calico.yaml

再次查看状态，此时已变成ready状态

shell

[root@kube-master ~]# kubectl get node
NAME           STATUS   ROLES                  AGE     VERSION
k8s-master01   Ready    control-plane,master   5h16m   v1.22.17
kube-node01    Ready    <none>                 5h4m    v1.22.17
kube-node02    Ready    <none>                 4h51m   v1.22.17
kube-node03    Ready    <none>                 4h49m   v1.22.17

[root@kube-master ~]# kubectl get node
NAME           STATUS   ROLES                  AGE     VERSION
k8s-master01   Ready    control-plane,master   5h16m   v1.22.17
kube-node01    Ready    <none>                 5h4m    v1.22.17
kube-node02    Ready    <none>                 4h51m   v1.22.17
kube-node03    Ready    <none>                 4h49m   v1.22.17

7.2 Metrics部署

shell

将Master01节点的front-proxy-ca.crt复制到所有Node节点
scp /etc/kubernetes/pki/front-proxy-ca.crt kube-node01:/etc/kubernetes/pki/front-proxy-ca.crt


#创建
[root@kube-master kubeadm-metrics-server]# kubectl  create -f comp.yaml
serviceaccount/metrics-server created
clusterrole.rbac.authorization.k8s.io/system:aggregated-metrics-reader created
clusterrole.rbac.authorization.k8s.io/system:metrics-server created
rolebinding.rbac.authorization.k8s.io/metrics-server-auth-reader created
clusterrolebinding.rbac.authorization.k8s.io/metrics-server:system:auth-delegator created
clusterrolebinding.rbac.authorization.k8s.io/system:metrics-server created
service/metrics-server created
deployment.apps/metrics-server created
apiservice.apiregistration.k8s.io/v1beta1.metrics.k8s.io created

#查看状态
[root@kube-master kubeadm-metrics-server]# kubectl get po -n kube-system -l k8s-app=metrics-server
NAME                              READY   STATUS    RESTARTS   AGE
metrics-server-54544fbf96-sjbvt   1/1     Running   0          49s

#执行监控命令
[root@kube-master kubeadm-metrics-server]# kubectl top node
NAME           CPU(cores)   CPU%   MEMORY(bytes)   MEMORY%
k8s-master01   182m         9%     1204Mi          65%
kube-node01    64m          3%     639Mi           34%
kube-node02    63m          6%     659Mi           35%
kube-node03    83m          8%     734Mi           39%

将Master01节点的front-proxy-ca.crt复制到所有Node节点
scp /etc/kubernetes/pki/front-proxy-ca.crt kube-node01:/etc/kubernetes/pki/front-proxy-ca.crt


#创建
[root@kube-master kubeadm-metrics-server]# kubectl  create -f comp.yaml
serviceaccount/metrics-server created
clusterrole.rbac.authorization.k8s.io/system:aggregated-metrics-reader created
clusterrole.rbac.authorization.k8s.io/system:metrics-server created
rolebinding.rbac.authorization.k8s.io/metrics-server-auth-reader created
clusterrolebinding.rbac.authorization.k8s.io/metrics-server:system:auth-delegator created
clusterrolebinding.rbac.authorization.k8s.io/system:metrics-server created
service/metrics-server created
deployment.apps/metrics-server created
apiservice.apiregistration.k8s.io/v1beta1.metrics.k8s.io created

#查看状态
[root@kube-master kubeadm-metrics-server]# kubectl get po -n kube-system -l k8s-app=metrics-server
NAME                              READY   STATUS    RESTARTS   AGE
metrics-server-54544fbf96-sjbvt   1/1     Running   0          49s

#执行监控命令
[root@kube-master kubeadm-metrics-server]# kubectl top node
NAME           CPU(cores)   CPU%   MEMORY(bytes)   MEMORY%
k8s-master01   182m         9%     1204Mi          65%
kube-node01    64m          3%     639Mi           34%
kube-node02    63m          6%     659Mi           35%
kube-node03    83m          8%     734Mi           39%

8.Kubernetes集群状态测试

8.1创建

shell

kubectl create deployment nginx --image=nginx --replicas=3

#创建负载均衡
kubectl expose deployment nginx --port=8080 --target-port=80

#查看pod，默认命名空间是defalut
[root@kube-master ~]# kubectl get pod
NAME                     READY   STATUS    RESTARTS   AGE
nginx-6799fc88d8-c4w7r   1/1     Running   0          2m18s
nginx-6799fc88d8-j7fvt   1/1     Running   0          2m18s
nginx-6799fc88d8-n5zs8   1/1     Running   0          2m18s

#查看service
[root@kube-master calico]# kubectl get service
NAME         TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)    AGE
kubernetes   ClusterIP   192.168.0.1     <none>        443/TCP    6h2m
nginx        ClusterIP   192.168.23.94   <none>        8080/TCP   39s

kubectl create deployment nginx --image=nginx --replicas=3

#创建负载均衡
kubectl expose deployment nginx --port=8080 --target-port=80

#查看pod，默认命名空间是defalut
[root@kube-master ~]# kubectl get pod
NAME                     READY   STATUS    RESTARTS   AGE
nginx-6799fc88d8-c4w7r   1/1     Running   0          2m18s
nginx-6799fc88d8-j7fvt   1/1     Running   0          2m18s
nginx-6799fc88d8-n5zs8   1/1     Running   0          2m18s

#查看service
[root@kube-master calico]# kubectl get service
NAME         TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)    AGE
kubernetes   ClusterIP   192.168.0.1     <none>        443/TCP    6h2m
nginx        ClusterIP   192.168.23.94   <none>        8080/TCP   39s

8.2检查ip连通性

shell

[root@kube-master calico]# kubectl get pod -o wide
NAME                     READY   STATUS    RESTARTS   AGE   IP              NODE          NOMINATED NODE   READINESS GATES
nginx-6799fc88d8-c4w7r   1/1     Running   0          17m   172.17.74.71    kube-node03   <none>           <none>
nginx-6799fc88d8-j7fvt   1/1     Running   0          17m   172.23.127.65   kube-node02   <none>           <none>
nginx-6799fc88d8-n5zs8   1/1     Running   0          17m   172.30.0.129    kube-node01   <none>           <none>

#在每个节点上ping其他pod节点上的ip
ping pod-ip

[root@kube-master calico]# kubectl get pod -o wide
NAME                     READY   STATUS    RESTARTS   AGE   IP              NODE          NOMINATED NODE   READINESS GATES
nginx-6799fc88d8-c4w7r   1/1     Running   0          17m   172.17.74.71    kube-node03   <none>           <none>
nginx-6799fc88d8-j7fvt   1/1     Running   0          17m   172.23.127.65   kube-node02   <none>           <none>
nginx-6799fc88d8-n5zs8   1/1     Running   0          17m   172.30.0.129    kube-node01   <none>           <none>

#在每个节点上ping其他pod节点上的ip
ping pod-ip

8.3检查service可达性

shell

#在每个节点上访问服务

curl service-ip:port

#在每个节点上访问服务

curl service-ip:port

8.4检查dns

shell

#进入pod容器中去

[root@kube-master calico]# kubectl exec -it nginx-6799fc88d8-c4w7r -- /bin/bash
root@nginx-6799fc88d8-c4w7r:/# 192.168.23.94:8080


root@nginx-6799fc88d8-c4w7r:/# curl nginx:8080


#查看dns解析
root@nginx-6799fc88d8-c4w7r:/# cat /etc/resolv.conf
nameserver 192.168.0.10
search default.svc.cluster.local svc.cluster.local cluster.local
options ndots:5

[root@kube-master calico]# kubectl get service -n kube-system
NAME           TYPE        CLUSTER-IP        EXTERNAL-IP   PORT(S)                  AGE
kube-dns       ClusterIP   192.168.0.10      <none>        53/UDP,53/TCP,9153/TCP   6h24m


[root@kube-master ~]# kubectl exec -it nginx-6799fc88d8-fqrlx -- /bin/bash
root@nginx-6799fc88d8-fqrlx:/# curl nginx.default.svc.cluster.local:8080

#进入pod容器中去

[root@kube-master calico]# kubectl exec -it nginx-6799fc88d8-c4w7r -- /bin/bash
root@nginx-6799fc88d8-c4w7r:/# 192.168.23.94:8080


root@nginx-6799fc88d8-c4w7r:/# curl nginx:8080


#查看dns解析
root@nginx-6799fc88d8-c4w7r:/# cat /etc/resolv.conf
nameserver 192.168.0.10
search default.svc.cluster.local svc.cluster.local cluster.local
options ndots:5

[root@kube-master calico]# kubectl get service -n kube-system
NAME           TYPE        CLUSTER-IP        EXTERNAL-IP   PORT(S)                  AGE
kube-dns       ClusterIP   192.168.0.10      <none>        53/UDP,53/TCP,9153/TCP   6h24m


[root@kube-master ~]# kubectl exec -it nginx-6799fc88d8-fqrlx -- /bin/bash
root@nginx-6799fc88d8-fqrlx:/# curl nginx.default.svc.cluster.local:8080

9.IPVS

shell

#默认是iptables，由于性能不强，需更换成ipvs
[root@kube-master ~]# curl 127.0.0.1:10249/proxyMode
iptables

#更新Kube-Proxy的Pod
kubectl patch daemonset kube-proxy -p "{\"spec\":{\"template\":{\"metadata\":{\"annotations\":{\"date\":\"`date +'%s'`\"}}}}}" -n kube-system

#验证
[root@kube-master ~]# curl 127.0.0.1:10249/proxyMode
ipvs

#默认是iptables，由于性能不强，需更换成ipvs
[root@kube-master ~]# curl 127.0.0.1:10249/proxyMode
iptables

#更新Kube-Proxy的Pod
kubectl patch daemonset kube-proxy -p "{\"spec\":{\"template\":{\"metadata\":{\"annotations\":{\"date\":\"`date +'%s'`\"}}}}}" -n kube-system

#验证
[root@kube-master ~]# curl 127.0.0.1:10249/proxyMode
ipvs

10.配置文件路径

shell

/etc/kubernetes/manifests

[root@kube-master manifests]# ls -trl
总用量 16
-rw------- 1 root root 3392 4月  10 16:31 kube-apiserver.yaml
-rw------- 1 root root 2908 4月  10 16:31 kube-controller-manager.yaml
-rw------- 1 root root 1492 4月  10 16:31 kube-scheduler.yaml
-rw------- 1 root root 2322 4月  10 16:31 etcd.yaml

这里面的配置文件，只要修改保存，会自动更新

/etc/kubernetes/manifests

[root@kube-master manifests]# ls -trl
总用量 16
-rw------- 1 root root 3392 4月  10 16:31 kube-apiserver.yaml
-rw------- 1 root root 2908 4月  10 16:31 kube-controller-manager.yaml
-rw------- 1 root root 1492 4月  10 16:31 kube-scheduler.yaml
-rw------- 1 root root 2322 4月  10 16:31 etcd.yaml

这里面的配置文件，只要修改保存，会自动更新

11.Kubernetes环境清理

shell

kubeadm reset

ifconfig tunl0 down && ip link delete tunl0

rm -fr /etc/kubernetes/*
rm -fr /var/lib/cni/*
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X
ipvsadm --clear

systemctl stop docker.socket
systemctl stop kubelet


-----卸载
kubeadm reset
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X
ipvsadm --clear
yum remove kubelet* -y
yum remove kubectl* -y
yum remove docker-ce*

kubeadm reset

ifconfig tunl0 down && ip link delete tunl0

rm -fr /etc/kubernetes/*
rm -fr /var/lib/cni/*
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X
ipvsadm --clear

systemctl stop docker.socket
systemctl stop kubelet


-----卸载
kubeadm reset
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X
ipvsadm --clear
yum remove kubelet* -y
yum remove kubectl* -y
yum remove docker-ce*

3-Docker

1.安装

4-Containerd

5-Swarm

6-KVM

2-资源对象

2-Pod

3-Deployment

4-Service

3-存储

1- 存储卷概念

2-NFS

备份

4-网络

OpenELB

6-安装

2.kubeadm安装

8-备份

9-常用操作

10-Yaml配置

12-CICD

13-Ingress

1-Ingress_nginx

2-Higress

14-云k8s

15-Kubernetes故障排查

1-Go

2-Go框架

3-Go编译

5-Go文档

6-Go日志

7-Web前端开发

4-vue

5-vue架构

FAQ

1-PG

0-体系结构

1-插件安装

2-安装

3-基础

4-用户管理

5-集群

6-备份和恢复

7-监控

8-优化

9-FAQ

4-Mongodb

1-安装

3-DDL

4-备份管理

5-集群管理

5-MQ

4-备份

5-集群

6-监控

6-Etcd

0-原理

1-DDL

2-用户管理

3-备份

4-集群

1-nginx

2-ssl证书

3-proxy

1-Service

2-DNS

3-VPN

4-Git

5-Gitlab

7-Ansible

9-GateWay

10-Storage

1-Minio

2-ZFS

11-Monitor

12-Logs

1-vector

13-环境变量

CMD

1-aliCloud

0.环境

1.软件版本

2.ip划分

3.图

1.配置kubeadm源

1.1安装依赖

1.2配置aliyun源

1.3配置docker源

1.4配置kubernetes源

2.基本环境配置

2.1 关闭selinux等

2.2 关闭swap

2.3 时间同步

2.4 limit配置

2.5 内核配置

1.升级内核

2.安装ipvsadm

3.配置必要参数

2.6配置hosts

2.7配置集群命令自动补全

3.Runtime安装

3.1 Containerd作为Runtime

1.安装docker-ce-20.10

2.配置Containerd所需模块

3.配置Containerd所需的内核

4.配置Containerd文件

5.启动

3.2 Docker作为Runtime

1.安装

2.启动

4.安装Kubernetes组件

1.查看版本

2.安装

3.启动

5.Kubernetes高可用

6.Kubernetes初始化

6.1创建配置文件

6.2拉取镜像

6.3master节点初始化

配置访问k8s集群配置文件

查看状态

6.4node节点加入

6.5master节点加入

key过期

7.Kubernetes组件安装

7.1 Calico

7.2 Metrics部署

8.Kubernetes集群状态测试

8.1创建